Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

show l2 filter
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
703
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW L2 FILTER
show l2 filter [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the details of all the L2 filters configured on the system.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show l2 filter
l2 filter F1
default deny
interface GigabitEthernet3/0 In
top
!
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
name If a L2 filter name is specified, it displays
the details for the specified filter.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English