System Configuration and Monitoring
Left running head:
Chapter name (automatic)
140
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SNMP-SERVER GROUP
snmp-server group <group-name> <security-name> security-model
{v1|v2c|v3}
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a User Security Model (USM) group.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# snmp-server group testgroup user123 security-model
v3
RELEASE HISTORY
Release 2.3: command was added.
Parameter Description
group-name Name used to represent the combination
of security model and security user
(SNMP v3 user).
security-name v3 user name to be associated with the
group.
security-model {v1|v2c|v3} Defines the SNMP version to be
associated with the group.
To Next Page
Loading...
