Alcatel-Lucent OmniAccess 5740 - Clear Ip Bgp Neighbor; Default-Information Originate

Border Gateway Protocol
Left running head:
Chapter name (automatic)
508
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR IP BGP NEIGHBOR
clear ip bgp <neighbor-address> [soft [in|out]]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command performs a reset on the connection with specified neighbor.
PARAMETERS
EXAMPLE
ALU# clear ip bgp 1.1.1.1
DEFAULT-INFORMATION ORIGINATE
default-information originate
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command is used to configure BGP router to advertise default route.
‘Redistribute’ command should be configured to complete this configuration.
PARAMETERS
None.
DEFAULT
Disabled.
EXAMPLE
ALU#(config-router bgp AS30)# default-information originate
Parameter Description
neighbor-address Resets only the specified BGP neighbor.
soft Triggers soft re-configuration.
in|out Triggers inbound or outbound update.