Alcatel-Lucent OmniAccess 5740 - Show Chassis

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
112
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW CHASSIS
show chassis [slot <0-3>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command provides a physical inventory of the chassis components for a specific
slot or for the entire system. It does not indicate the liveness of the elements
listed.
PARAMETERS
EXAMPLE
ALU(config)# show chassis
Physical inventory at Thu Jul 8 14:49:33 2010
System started approximately Thu Jul 8 14:29:53 2010
Uptime is 0 days 0 hours 22 minutes 10 seconds
T1/E1 - Four port T1/E1 (active)
Slot number: 1
Part number: 902604-90
Manufacturer: ALU
Description: Four port T1/E1
Serial number: DG0820000252
Version: 03
Revision: 00
LoL firmware version: 2.2.71
Loader version: 2.35
ALU-OS version: 3.0.0
SE - Services engine (active)
Slot number: 3
Part number: 902601-90
Manufacturer: ALU
Description: Services engine
Serial number: DG0818000126
Version: 02
Revision: 00
CPU Version: 1 (Low Power Opteron)
Opteron CPU Version: 1
Opteron CPU Frequency: 2193 MHz
LoL firmware version: 2.2.71
Loader version: 2.35
ALU-OS version: 3.0.0
MDC
Serial number: DG0818000008
Revision: 00
Version: 03
BP - ALU OA740 chassis (passive)
Parameter Description
0-3 Slot numbers from 0 - 3.