Alcatel-Lucent OmniAccess 5740 - Show Frame-Relay Lmi

Frame Relay
Left running head:
Chapter name (automatic)
284
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW FRAME-RELAY LMI
show frame-relay lmi [interface <Serial> <slot/port:channel>]
DESCRIPTION
This command is entered in the Super User Mode, Configuration Mode or
Interface Configuration Mode. Displays the frame-relay LMI configuration details
and parameters for all the interfaces or a specific interface.
PARAMETERS
EXAMPLE
The following example displays the FR LMI configuration details and parameters
for all the interfaces:
ALU(config-if Serial0/0:0)#show frame-relay lmi
LMI Statistics for interface Serial0/0:0 (Frame Relay DTE)
LMI TYPE = AUTOSENSE
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 0
The following example displays the FR LMI configuration details and parameters
for a specific interface:
ALU(config-if Serial0/0:0)#show frame-relay lmi interface
Serial 0/0:0
LMI Statistics for interface Serial0/0:0 (Frame Relay DTE)
LMI TYPE = AUTOSENSE
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 0 Num Status msgs Rcvd 0
Num Update Status Rcvd 0 Num Status Timeouts 0
Parameter Description
<slot/port:channel> Slot, port and channel group number of
the serial interface.