ip dhcp option next-server
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
931
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IP DHCP OPTION NEXT-SERVER
ip dhcp option next-server <ip-address> [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the IP address of the Network Time Protocol server to be used by the
clients.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# ip dhcp option next-server 1.1.1.2
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
ip-address IP address of the next server.
vrf-name If the VRF name is specified in the
commands, it configures the DHCP
option for the specified VRF.
If the VRF is not specified, the option is
configured for the Default VRF.
To Next Page
Loading...
Need help?
General
