EasyManuals Logo

Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Alcatel-Lucent OmniAccess 5740
1043 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #238 background imageLoading...
Page #238 background image
show spanning-tree vlan
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
203
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW SPANNING-TREE VLAN
show spanning-tree vlan <1-4094>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the VLAN based spanning tree information.
PARAMETERS
EXAMPLE 1
ALU# show spanning-tree vlan 2
Spanning tree 2 is executing the IEEE compatible Spanning Tree Protocol
Bridge Identifier has priority 32768, address 00.11.8b.00.27.21
Configured hello time 2, max age 20,forward delay 15
Current root has priority 2, address 00.07.50.0c.a1.03
Root port is 128.8 cost of root path is 4
Topology change flag not set, detected flag not set
Times: hold 1, topology change 35, notification 2
hello 2, max age 20, forward delay 15
Timers: hello 0, topology change 0, notification 0
Interface switchport0/0 (port 8) in Spanning tree 2 is Forwarding
Port path cost 4, Port priority 128
Designated root has priority 2, address 00.07.50.0c.a1.03
Designated bridge has priority 2, address 00.07.50.0c.a1.03
Designated port Id is 128.13 path cost 4
Timers: message age 0, forward delay 0, hold 0
BPDU: sent 0, received 535
EXAMPLE 2
ALU(config)# show spanning-tree vlan 1
Spanning tree 1 is executing the IEEE compatible Spanning Tree Protocol
Bridge Identifier has priority 32768, address 00.11.8b.00.27.12
Configured hello time 2, max age 20,forward delay 15
We are the root of the spanning tree
Topology change flag not set, detected flag not set
Times: hold 1, topology change 35, notification 2
hello 2, max age 20, forward delay 15
Timers: hello 1, topology change 0, notification 0
Interface switchport1/0 (port 8) in Spanning tree 1 is Forwarding
Port path cost 4, Port priority 128
Designated root has priority 32768, address 00.11.8b.00.27.12
Designated bridge has priority 32768, address 00.11.8b.00.27.12
Designated port Id is 128.8 path cost 0
Parameter Description
1-4094 The VLAN ID whose information is to be
viewed.

Table of Contents

Other manuals for Alcatel-Lucent OmniAccess 5740

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent OmniAccess 5740 and is the answer not in the manual?

Alcatel-Lucent OmniAccess 5740 Specifications

General IconGeneral
BrandAlcatel-Lucent
ModelOmniAccess 5740
CategoryGateway
LanguageEnglish

Related product manuals