no frame-relay fragment
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
391
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO FRAME-RELAY FRAGMENT
no frame-relay fragment
This command is entered in the Interface Configuration Mode. The ‘no’ command
sets fragment size to the default value and hence unconfigures the fragment size
on the FR interface, i.e., no fragmentation will be applicable.
NO SERVICE-POLICY
no service-policy {in|out} <policy-map name>
This command is entered in the Interface Configuration Mode. The ‘no’ command
detaches the policy map from the interface.
NO SLIPPAGE MRU
no slippage mru
This command is entered in the Interface Configuration Mode. The ‘no’ command
sets the slippage MRU to its default, i.e., 32 MRU.
SERVICE-POLICY
service-policy {in|out} <policy-map name>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to attach a policy map to the an interface.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if Serial0/0:0)# service-policy out P1
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
in|out Ingress or egress direction.
policy-map name Name of the policy map.
To Next Page
Loading...
Need help?
General
