default-metric
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
421
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
DEFAULT-METRIC
default-metric <metric-value>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
causes the current routing protocol to use the same metric value for all
redistributed routes (BGP, OSPF, RIP).
PARAMETERS
DEFAULT VALUE
This command is disabled by default.
EXAMPLE
ALU(config-router ospf1)# default-metric 10
Parameter Description
1-4294967295 Default metric value appropriate for the specified routing
protocol.
To Next Page
Loading...
