Network Address Translation
Left running head:
Chapter name (automatic)
686
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP NAT
show ip nat [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays details of all the configured NAT policies or a specific NAT policy.
PARAMETERS
EXAMPLE
1. The following example displays the details of all the NAT policies configured:
ALU# show ip nat
ip nat n1
10 match all m1 source-nat
ip nat n2
10 match m2 source-nat
ip nat n3
1 match all m3 destination-nat host 2.2.2.2
2. The following example shows the configuration details of a specific NAT policy:
ALU# show ip nat n1
ip nat n1
10 match all m1 source-nat
10 match m2 source-nat
Parameter Description
name NAT policy name.
To Next Page
Loading...
