Alcatel-Lucent OmniAccess 5740 - Show Ip Bgp

show ip bgp
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
531
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP BGP
show ip bgp [<network-number>|<ip-address/prefix-length>]
[longer-prefixes]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays entries in the BGP routing table.
PARAMETERS
EXAMPLE 1
ALU# show ip bgp
BGP local router ID is 111.111.111.111
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Prefix/len Next Hop Metric LocPref Weight Path
*> 1.0.0.0/8 1.1.1.2 200 100 70 100i
*> 4.0.0.0/8 1.1.1.2 200 100 70 100i
*> 5.0.0.0/8 1.1.1.2 200 100 70 100i
*> 6.0.0.0/8 1.1.1.2 200 100 70 100i
* d 7.0.0.0/8 1.1.1.2 200 100 70 100i
*> 111.111.111.0/24 111.111.111.112 110 100 50 300?
* d 118.0.0.0/24 111.111.111.112 110 100 50 300?
ALU#
Parameter Description
network-number Display a particular network in the BGP routing table.
ip-address/
prefix-length
Display a particular network in the BGP routing table.
longer-prefixes Displays route for the given network. It also shows all the
more specific routes in the given network.
Field Description
ip-address/
prefix-length
Network with prefix length in the BGP routing table.
network-number Network in the BGP routing table.
bestpaths BGP bestpaths table.
cidr-only Displays routes with non-natural masks only.
community Displays routes matching with the communities.
community-list Displays routes matching the community-list.
dampened-paths Displays paths that have suppressed due to dampening.