Alcatel-Lucent OmniAccess 5740 - Set Local-Preference Number Value

Protocol Independent Features
Left running head:
Chapter name (automatic)
450
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DEFAULT VALUE
By default, set dampening is disabled.
EXAMPLE
ALU(config-route-map)# set dampening 10 2000 2000 15
SET LOCAL-PREFERENCE NUMBER VALUE
set local-preference <0-4294967295>
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This command
assigns a local preference to the BGP path.
PARAMETERS
DEFAULT VALUE
By default, local preference value is 100.
EXAMPLE
ALU(config-route-map)# set local-preference 100
1-20000 A route becomes invalid when penalty exceeds the
configured suppress limit.
The default is 2000 seconds.
1-255 Maximum time (in minutes) a route can be suppressed. The
default is four times the half-time value.
Parameter Description
0-4294967295 Preference value.
Parameter Description