Integrated Routing and Bridging
Left running head:
Chapter name (automatic)
212
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IRB CLI COMMANDS
This section deals with the commands related to configuring IRB on an interface.
INTERFACE VLAN
interface vlan <1-4094>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a VLAN.
PARAMETERS
Note: Vlan ID = 1 can also be configured for IRB.
EXAMPLE
ALU(config)# interface vlan 10
Parameter Description
1-4094 VLAN-ID configured on the interface.
To Next Page
Loading...
