Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

host
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
925
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
HOST
host <ip-address> <mac-address>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to statically bind an IP address with a hardware (MAC) address.
Note: The IP address should exist within any of the configured network pools and should be
configured in a different pool that does not contain any network.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p2)# host 1.2.3.66 1122.aabb.55ff
Parameter Description
ip-address IP address within any of the configured
network pools.
mac-address Hardware address of the host.
The format of the hardware address is
aaaa.bbbb.cccc.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English