encapsulation
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
253
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
ENCAPSULATION
encapsulation {frame-relay|ppp|hdlc|mlfr <bundle_id>|mlppp
<bundle_id>}
DESCRIPTION
This command is entered in the Interface Configuration Mode to set encapsulation
on the interface.
PARAMETERS
DEFAULT VALUE
Default is HDLC encapsulation.
EXAMPLE
ALU(config)# interface Serial 0/0:0
ALU(config-if Serial0/0:0)# encapsulation frame-relay
ALU(config)# interface Serial 0/0:0
ALU(config-if Serial0/0:0)# encapsulation ppp
Parameter Description
frame-relay Framerelay encapsulation.
ppp Point to Point Protocol encapsulation.
hdlc High Level Data Link Control
encapsulation.
mlfr <bundle_id> The Multi-link Frame Relay bundle
interface that is identified by the bundle
ID.
mlppp <bundle_id> The Multilink Point-Point Protocol bundle
interface that is identified by the bundle
ID.
To Next Page
Loading...
Need help?
General
