Alcatel-Lucent OmniAccess 5740 - Show Ip Ospf Process-Interface

show ip ospf process-interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
595
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP OSPF PROCESS-INTERFACE
show ip ospf process-interface
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the process interface table.
PARAMETERS
None.
EXAMPLE
ALU(config-router ospf 20)# show ip ospf process-interface
Process-Interface Table:
Process-Id Interfaces
20 GigabitEthernet3/0, GigabitEthernet3/0