Open Shortest Path First
Left running head:
Chapter name (automatic)
594
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
E
XAMPLE 3
ALU# show ip ospf neighbor detail
Neighbor 1.1.1.1, interface address 1.1.1.1
In the area 0 via interface GigabitEthernet3/0
Neighbor priority is 1, State is FULL, 19 state changes
DR is 1.1.1.2 BDR is 1.1.1.1
Options is 0x42
Dead timer due in 00:00:31
Neighbor is up for 00:49:28
retransmission queue length 0, number of retransmissions 1
Neighbor 6.6.6.6, interface address 2.2.2.1
In the area 1 via interface GigabitEthernet3/1
Neighbor priority is 1, State is FULL, 10 state changes
DR is 2.2.2.2 BDR is 2.2.2.1
Options is 0x42
Dead timer due in 00:00:35
Neighbor is up for 00:31:32
retransmission queue length 0, number of retransmissions 0
Parameter Description
Neighbor Neighbor router ID.
Interface address IP address of the interface.
In the area Area and interface through which the
OSPF neighbor is known.
Neighbor priority Router priority of the neighbor, neighbor
state.
State changes Number of state changes since the
neighbor was created. This value can be
reset using the ‘clear ip ospf counters
neighbor’ command.
DR is Router ID of the designated router for
the interface.
BDR is Router ID of the backup designated
router for the interface.
Options Hello packet options field contents.
Dead timer due in Expected time before the router declares
the neighbor dead.
Neighbor is up for Number of hours:minutes:seconds since
the neighbor went into two-way state.
retransmission queue length Number of elements in the
retransmission queue. Number of times
update packets have been resent during
flooding.
To Next Page
Loading...
