ike-policy
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
831
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IKE-POLICY
ike-policy <name>
DESCRIPTION
This command is entered in the Client Profile Configuration Mode. This command
is used to attach an already configured IKE policy to an IPsec client profile.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-client-prof-myclientprofile)# ike-policy IKE1
RELEASE HISTORY
Release 3.0: command was introduced in the Client Profile Configuraiton Mode.
Parameter Description
name Name of the IKE policy.
To Next Page
Loading...
