Alcatel-Lucent OmniAccess 5740 - Nslookup; Show Hosts

nslookup
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
983
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NSLOOKUP
nslookup {<ip-address>|<host-name>}
DESCRIPTION
This command is entered in the Configuration Mode. This command can be used
for reverse DNS lookup, i.e., to translate DNS name to an IP address or vice-
versa.
PARAMETERS
EXAMPLE
ALU(config)# nslookup www.google.com
SHOW HOSTS
show hosts
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows all the configuration parameters, and all learned name/address
mappings.
PARAMETERS
None.
EXAMPLE
ALU(config)# show hosts
Default domain is abc.com
Domain list: test1, test
Name/address lookup uses domain service
Name server(s): 1.1.1.1, 1.1.1.2, 1.1.1.3
Dynamic host maximum age (seconds): 300
Address Type TTL Name
--------------- ------- ----- ------------
64.233.187.99 static www.google.com
216.109.112.135 dynamic 294 yahoo.com
Parameter Description
ip-address IP address of a host on the network.
host-name DNS name of a host on the network.