Link Fragmentation and Interleaving (LFI)
Left running head:
Chapter name (automatic)
392
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SLIPPAGE MRU
slippage mru <16-128>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
specifies the number of fragments that can be buffered per Virtual Circuit (VC).
PARAMETERS
DEFAULT VALUE
The default slippage MRU value is 32 MRU.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if Serial0/0:0)# slippage mru 16
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
16-128 Specifies the number of fragments that
can be buffered per VC.
To Next Page
Loading...
