Ethernet OAM (Operations, Administration, and Maintenance)
Left running head:
Chapter name (automatic)
340
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CCM
ccm {disable|enable}
DESCRIPTION
This is entered in the OAM Domain Association MEP Configuration Mode. This
command is used to enable/disable CCM messages on a MEP (Maintenance
Association End Point).
PARAMETERS
DEFAULT VALUE
By default, the CCM will be disabled.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-oam-domain-assoc-mep)# ccm enable
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
disable|enable Enable/disable CCM messages on a
MEP.
To Next Page
Loading...
