Alcatel-Lucent OmniAccess 5740 - No Ip Tcp Adjust-Mss; No Ip Unnumbered; Passive-Interface

Protocol Independent Features
Left running head:
Chapter name (automatic)
442
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO IP TCP ADJUST-MSS
no ip tcp adjust-mss <24-1460>
This command is entered in the Interface Configuration Mode. This command
removes the MSS configuration on the interface.
NO IP UNNUMBERED
no ip unnumbered <interface-name> <slot/port>
This command is entered in the Interface Configuration Mode. This command is
used to unconfigure the unnumbered interface.
PASSIVE-INTERFACE
passive-interface <interface-name>
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
suppresses sending of routing updates through the specified interface.
PARAMETERS
DEFAULT VALUE
Routing updates are sent on the interface.
EXAMPLE
ALU(config-router ospf1)# passive-interface GigabitEthernet 3/0
Parameter Description
interface-name Name of the interface.