flowcontrol
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
175
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
FLOWCONTROL
flowcontrol {receive|send} {off|on}
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
configures flowcontrol on a GigE interface.
PARAMETERS
None.
DEFAULT VALUE
By default, the flowcontrol is set to “Off”.
EXAMPLE
ALU(config-if GigabitEthernet3/0)# flowcontrol receive on
INTERFACE
interface GigabitEthernet <slot/port>
DESCRIPTION
This command is entered in the Configuration Mode. This command allows you to
configure GigE interface.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# interface GigabitEthernet 3/0
ALU(config-if GigabitEthernet3/0)#
Parameter Description
slot/port Slot and port number of the interface.
To Next Page
Loading...
