EasyManuals Logo

Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Alcatel-Lucent OmniAccess 5740
1043 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #457 background imageLoading...
Page #457 background image
Protocol Independent Features
Left running head:
Chapter name (automatic)
422
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DISTANCE
distance <1-255> [[ip-address subnet-mask|ip-address/prefix-
length][<1-99>|<1300-1999>]]
DESCRIPTION
Enter the above command in Router Configuration Mode. This command is used
to define an administrative distance for RIP or OSPF or BGP.
PARAMETERS
DEFAULT VALUE
RIP - The default distance is 120.
OSPF - The default distance is 110.
BGP - The default distance is 20 for EBGP and 200 for IBGP.
EXAMPLE
ALU(config-router rip)# distance 130 10.0.0.0/8 20
ALU(config-router ospf 1)# distance 60 10.0.0.0/8
ALU(config-router bgp AS1)#distance bgp 30 10 5
Parameter Description
1-255
Sets the administrative distance for RIP or OSPF or BGP
external routes.
[<ip-address
subnet-mask|<ip-
address/prefix-
length>]
IP address with subnet mask.
1-99
Standard IP access list number.
1300-1999
Standard IP access list number.

Table of Contents

Other manuals for Alcatel-Lucent OmniAccess 5740

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent OmniAccess 5740 and is the answer not in the manual?

Alcatel-Lucent OmniAccess 5740 Specifications

General IconGeneral
BrandAlcatel-Lucent
ModelOmniAccess 5740
CategoryGateway
LanguageEnglish

Related product manuals