show frame-relay pvc
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
285
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW FRAME-RELAY PVC
show frame-relay pvc [{<16-1022>|interface <Serial> <slot/
port:channel>]
DESCRIPTION
This command is entered in the Super User Mode, Configuration Mode or
Interface Configuration Mode. This command displays the status of the Frame
Relay Permanent Virtual Circuit (PVC).
PARAMETERS
EXAMPLE
ALU(config-if Serial0/0:0)# show frame-relay pvc interface
Serial 0/0:0
PVC Statistics for interface Serial0/0:0 (Frame Relay DTE)
DLCI = 200, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0/0:0
input pkts 0 output pkts 0
in bytes 0 out bytes 0
in pkts dropped 0 out pkts dropped 0
in FECN pkts 0 out FECN pkts 0
in BECN pkts 0 out BECN pkts 0
in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
Parameter Description
16-1007 DLCI value.
<slot/port:channel> Slot, port and channel group number of
the serial interface.