Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Virtual Routing and Forwarding
Left running head:
Chapter name (automatic)
664
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP VRF
show ip vrf [interfaces <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the information on the defined VRF instances.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show ip vrf interfaces ALU
Interface IP Address VRF Protocol
GigabitEthernet3/1 1.1.1.1 ALU Down
ALU(config)# show ip vrf interfaces ALU-vrf
Interface IP Address VRF Protocol
GigabitEthernet3/0 2.2.2.2 ALU-vrf up
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name If the VRF name is specified, then its
displays all the interfaces associated
with the specified VRF.
interfaces A detailed information of all the VRFs
configured on all the interfaces.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English