Alcatel-Lucent OmniAccess 5740 - Peer-Ca; Peer-Cert

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
782
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PEER-CA
peer-ca <name>
DESCRIPTION
This command is entered in the ike-identity mode. This command specifies the
issuer (CA) of the peer's certificate.
PARAMETER
EXAMPLE
ALU(config-ike-identity-exampleidentity)# peer-ca CN=ALU,
OU=Certificate Authority, C=US
PEER-CERT
peer-cert <name>
DESCRIPTION
This command is entered in the ike-identity mode. This command specifies the
self signed peer’s certificate. This can be used if a trusted peer is not enrolled to
any of the CAs.
PARAMETER
EXAMPLE
ALU(config-ike-identity-exampleidentity)# peer-cert cert_robert
parameter Description
name Name of the peer certificate imported
previously.
parameter Description
name Name of the self signed peer certificate.