Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

switchport trunk allowed vlan range
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
197
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SWITCHPORT TRUNK ALLOWED VLAN RANGE
switchport trunk allowed vlan range <2-4094> <2-4094>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command is
used to configure a range of VLANs in trunk mode under a switchport interface.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if switchport1/0)# switchport trunk allowed vlan
range 30 40
RELEASE HISTORY
Release 2.3.2: command was introduced.
Parameter Description
<2-4094> <2-4094> Low Vlan ID and the high Vlan ID.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English