DHCP (Dynamic Host Configuration Protocol) Client
Left running head:
Chapter name (automatic)
960
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO IP DHCP CLIENT OPTION HOSTNAME
no ip dhcp client option hostname <host-name>
This command is entered in the Interface Configuration Mode. This command is
used to delete the host name option used by the DHCP client.
NO PARAMETER-REQ-LIST
no parameter-req-list {bootfile-name|classless-static-routes
|lease-time|ntp-server|rebinding-time|renewal-time
|routers|server-identifier|sip-server|subnet-mask|tftp-server-
addr|tftp-server-name|vendor-specific}
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to delete a DHCP parameter request list option from the client
object.
NO REQUESTED-ADDRESS
no requested-address <ip-address>
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to delete the requested IP address from client object
configuration.
NO REQUEST-TYPE
no request-type {address|inform}
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to delete the configured type of request, and sets it to default.
The default request type is 'address'.
NO USER-CLASS
no user-class <user-class-suboption>
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to delete user class sub-option from the DHCP client object.
NO VENDOR-CLASS-IDENTIFIER
no vendor-class-identifier <identifier>
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to delete the vendor class identifier option configured for a
client object.
To Next Page
Loading...
Need help?
General
