Alcatel-Lucent OmniAccess 5740 - Primary_Dns_Ip

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
836
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PRIMARY_DNS_IP
primary_dns_ip <ip-address> secondary_dns_ip <ip-address>
DESCRIPTION
This command is entered in the Client Object Configuration Mode. This command
is used to configure the IP address of the primary and secondary DNS in a crypto
client object. This is the primary and secondary DNS to be sent to IPSec client.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-client-obj-myclientobject)# primary_dns_ip 1.1.1.1
secondary_dns_ip 1.1.1.2
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
primary_dns_ip <ip-address> IP address of the primary DNS.
secondary_dns_ip <ip-address> IP address of the secondary DNS.