Alcatel-Lucent OmniAccess 5740 - No Ip Split-Horizon; No Ip Rip Triggered; No Neighbor; No Network

no ip split-horizon
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
475
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO IP SPLIT-HORIZON
no ip split-horizon
This command is entered in the Interface Configuration Mode. This command
disables the split horizon mechanism.
NO IP RIP TRIGGERED
no ip rip triggered
This command is entered in the Interface Configuration Mode. The ‘no’ command
disables the RIP trigger update.
NO NEIGHBOR
no neighbor <neighbor-address>
This command is entered in the Router Configuration Mode. This command
removes the statically configured neighbors.
NO NETWORK
no network <network-number>
This command is entered in the Router Configuration Mode. The above command
disables the configured network. RIP stops sending updates through interfaces on
this network. Also these interfaces will not be advertised in any RIP updates.
NO OFFSET-LIST
no offset-list {{<0-99>|<1300-1999> <access-list name>}
{in|out}} {<0-16>} [<interface-name>]
This command is entered in the Router Configuration Mode. The above command
disables the configured offset-list.