Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

show firewall session detail
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
731
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW FIREWALL SESSION DETAIL
show firewall session detail [proto {gre|icmp|tcp|udp}|vrf
<vrf-name> [destination|proto |source]]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view all the firewall sessions in a detailed format. By default,
this command displays the sessions for the default VRF.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
The following syntax is used to view the details of firewall session
ALU(config)# show firewall session detail
ID 70 ICMP timeout 28 secs, used by NAT
Initiator: (10.91.1.108:13)=>(10.91.0.1:13)
Responder: (10.91.0.1:34416)=>(10.91.1.108:34416)
RELEASE HISTORY
Release 2.3: Parameter [vrf <vrf-name>] was added.
Parameter Description
proto {gre|icmp|tcp|udp} Shows the session details for the
specified protocol.
vrf-name Name of the VRF. When this is used, the
command displays the sessions for the
specified VRF.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English