Open Shortest Path First
Left running head:
Chapter name (automatic)
556
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
AUTO-COST
auto-cost [reference-bandwidth <1-4294967>]
DESCRIPTION
This command is entered in the Router Configuration Mode. This command is
used to calculate the interface cost based on the reference bandwidth.
The OSPF metric is calculated as the reference bandwidth value divided by the
bandwidth, with reference bandwidth equal to 10
8
by default.
PARAMETERS
DEFAULT VALUE
Default value for reference bandwidth is 100.
EXAMPLE
ALU(config-router ospf 30)# auto-cost referenece-bandwidth 100
CLEAR IP OSPF
clear ip ospf [[<1-65535>|process|redistribution|counters
[neighbor] [neighbor-id] [interface-name]|interface statistics
[hello|ddp|lsupd |lsack|lsreq][<interface-name>]]
DESCRIPTION
This command is entered in the Router Configuration Mode. This command
restarts OSPF router if only process ID is specified. For other parameters, it
restarts the specified counters/feature.
PARAMETERS
EXAMPLE
ALU# clear ip ospf 1 redistribution
Parameter Description
1-4294967 The reference bandwidth in terms of Mbits per second. The
default is 100.
Parameter Description
1-65535 OSPF process ID.
neighbor-id Neighbor router ID.
interface-name The interface name for the which counters is to be cleared.
To Next Page
Loading...
Need help?
General
