Alcatel-Lucent OmniAccess 5740 - Client-Object

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
828
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLIENT-OBJECT
client-object <name>
DESCRIPTION
This command is entered in the Client Profile Configuration Mode. This command
is used to attach an already configured client object to a client profile.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-client-prof-myclientprofile)# client-object
myclientobject
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
name Name of the client object.