Alcatel-Lucent OmniAccess 5740 - Show Service-Policy

show service-policy
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
913
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW SERVICE-POLICY
show service-policy [{<policy-map name>|in|out}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the statistics for Policing/Shaping, being used in a policy.
PARAMETERS
EXAMPLE
ALU(config)# show service-policy p2 out
interface Serial0/0:0
service-policy out p2
Class class-default
0 packets total, 0 bytes total,
0 packets transmitted, 0 bytes transmitted,
0 packets dropped, 0 bytes dropped,
Class cm_ef match-any
match any ml_ef
0 packets total, 0 bytes total,
0 packets transmitted, 0 bytes transmitted,
0 packets dropped, 0 bytes dropped,
RED:
Class Random drops Tail drops Min.Th. Max.Th. Mark Prob.
be 0 0 50 150 1/10
af11 0 0 100 150 1/10
af12 0 0 75 150 1/10
af13 0 0 50 150 1/10
af21 0 0 100 150 1/10
af22 0 0 75 150 1/10
af23 0 0 50 150 1/10
af31 0 0 100 150 1/10
af32 0 0 75 150 1/10
af33 0 0 50 150 1/10
af41 0 0 100 150 1/10
af42 0 0 75 150 1/10
af43 0 0 50 150 1/10
ef 0 0 125 150 1/10
Class cm_af11 match-any
match any m1_af11
0 packets total, 0 bytes total,
0 packets transmitted, 0 bytes transmitted,
0 packets dropped, 0 bytes dropped,
Class L2-network-control
Parameter Description
policy-map name Name of the policy-map whose statistics
details is to be viewed.
in Ingress statistics.
out Egress statistics.