Per VLAN Spanning Tree +
Left running head:
Chapter name (automatic)
206
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SPANNING-TREE VLAN COST
spanning-tree [vlan <1-4094>] cost <1-65535>
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
calculates the path cost of PVST+ on an interface.
This is configurable on a per port basis. It is used on LAN ports configured as
Layer 2 access ports.When two bridges compete for position as the root bridge,
the above command is used to prioritize an interface.
PARAMETERS
DEFAULT VALUE
Default value: 4
EXAMPLE
ALU(config-if switchport1/0)# spanning-tree vlan 100 cost 1000
Parameter Description
1-65535 PVST+ port cost.
To Next Page
Loading...
Need help?
General
