Alcatel-Lucent OmniAccess 5740 - Show Ip Access-Lists; Show Ip As-Path-Access-List

Protocol Independent Features
Left running head:
Chapter name (automatic)
454
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP ACCESS-LISTS
show ip access-lists [<1-199>|<1300-2699>|<access-list name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the IP access-list configuration.
PARAMETERS
EXAMPLE
ALU# show ip access-lists
Standard IP access list test
permit host 10.0.0.1 (0 packets)
permit 11.0.0.0 0.255.255.255 (0 packets)
deny 12.0.0.0 0.255.255.255 (0 packets)
ALU#
SHOW IP AS-PATH-ACCESS-LIST
show ip as-path-access-list [<1-199>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the AS-path -access-list configuration.
PARAMETERS
EXAMPLE
ALU# show ip as-path-access-list
AS path access list 1
deny _100_
ALU#
Parameter Description
1-199 Specify the standard access list number whose
configuration details are to be viewed.
1300-2699 Specify the extended access list number whose
configuration details are to be viewed.
access-list name Name of a specific access list whose configuration details
are to be viewed.
Parameter Description
1-199 Specify the as-path access list number whose configuration
details is to be viewed.