no channel-group
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
257
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO CHANNEL-GROUP
no channel-group <0-23>
This command is entered in the Controller Configuration Mode. This command
removes the channel-groups configured on the controller.
NO ENCAPSULATION
no encapsulation
This command is entered in the Interface Configuration Mode. This command
restores the encapsulation to its default.
NO FRAMING
no framing
This command is entered in the Controller Configuration Mode. This command
resets the framing value to its default.
NO LINECODE
no linecode
This command is entered in the Controller Configuration Mode. This command
sets the line coding to its default value.For b8zs the default line coding value is
b8zs. For hdb3 the default line code value is HDB3.
NO LOOPBACK
no loopback
This command is entered in the Controller Configuration Mode. The command
disables the loopback mode set on the interface. The default loopback for T1 lines
is Local.
NO MTU
no mtu
This command is entered in the Interface Configuration Mode. This command
sets the MTU to its default.
NO SHUTDOWN
no shutdown
This command when entered in the Controller Configuration Mode brings up the
controller.
This command when entered in the Interface Configuration Mode brings up the
interface.
To Next Page
Loading...
Need help?
General
