show firewall policy
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
729
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW FIREWALL POLICY
show firewall policy [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view all the firewall policy details configured. This command
is also used to view the details of a specific firewall policy.
PARAMETERS
EXAMPLE
To view the firewall policy details, use the following syntax:
ALU# show firewall policy P1
policy P1
10 match any dos attack P1 drop
interface GigabitEthernet3/0 In
SHOW FIREWALL POLICY SYSTEM-DEFAULT
show firewall policy system-default
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view the system default policy configuration.
PARAMETERS
None.
EXAMPLE
ALU# show firewall policy system-default
policy system-default
10 match all attack system-default drop
system-traffic firewall policy system-default
Parameter Description
name Name of the policy.
To Next Page
Loading...
Need help?
General
