Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

Link Fragmentation and Interleaving (LFI)
Left running head:
Chapter name (automatic)
388
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SLIPPAGE MRU
slippage mru <16-256>
DESCRIPTION
This command is entered in the Interface Configuration Mode.
Slippage on MLPPP interface allows configuration of buffer in terms of MRU,
which represent number of fragments to be stored without getting reassembled.
Based on the slippage parameter configuration, buffer is allocated on the receiver
side.
PARAMETERS
DEFAULT VALUE
The default slippage MRU value is 32 MRU.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# interface mlppp 100
ALU(config-if mlppp100)# slippage mru 16
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
16-256 Specifies the number of fragments to be
stored at a time on the MLPPP bundle.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English