Alcatel-Lucent OmniAccess 5740 - Show Firewall Session Destination

show firewall session destination
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
733
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW FIREWALL SESSION DESTINATION
show firewall session [destination {<ip-address>|<ip-address/
prefix-length>} [{<1-65535>|proto {gre|icmp|tcp|udp}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view the firewall session details given the source address.
PARAMETERS
EXAMPLE
ALU(config)# show firewall session destination ip 10.91.0.1
ID 70 ICMP timeout 25 secs, used by NAT
Initiator: (10.91.1.108:13)=>(10.91.0.1:13)
Responder: (10.91.0.1:34416)=>(10.91.1.108:34416)
Parameter Description
ip-address Destination IP address.
ip-address/prefix-length Destination IP address with prefix length.
1-65535 Denotes the port number.
gre|icmp|tcp|udp Protocol type.