IPsec Tunnel Interface CLI Commands
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
803
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
IPSEC TUNNEL INTERFACE CLI COMMANDS
This section deals with the commands relevant to IPsec tunnel interface
configuration.
CRYPTO IPSEC PROFILE
crypto ipsec profile <name> [force]
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure an IPsec Profile.
PARAMETERS
EXAMPLE
ALU(config)# crypto ipsec profile PF1
ALU(ipsec-profile-PF1)#
Parameter Description
name Name of the IPsec Profile.
force This option is used to modify a ipsec
profile when it is applied to an interface.
To Next Page
Loading...
