System Configuration and Monitoring
Left running head:
Chapter name (automatic)
86
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PACKAGE SET-DEFAULT
package set-default <package-name>
DESCRIPTION
This command is entered in the Configuration Mode. If the specified package is
not the default package, it is set as default. The system can have multiple
application packages (like 2.3.2.17.1, 2.3.2.18.1). The package being set as
default should exist in the system.
PARAMETERS
EXAMPLE
To set the package 3.0.0.82.0 as default:
ALU# package set-default 3.0.0.82.0
Do you want to set-default immediately?
Yes: Chassis will be rebooted automatically
No : Manually run set-default at a later time
Proceed? (y/[n]) : y
Do you want to save config before proceeding ([y]/n) : y
Building configuration...
[OK]
Setting Default image to 3.0.0.82.0...
Parameter Description
package-name Name of the package to be set as default.
To Next Page
Loading...
