Open Shortest Path First
Left running head:
Chapter name (automatic)
580
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PARAMETERS OF ‘SHOW IP OSPF DATABASE’
EXAMPLE
EXAMPLE 1
To see summary of LSAs in router database, use the following command:
show ip ospf database
OSPF Router with ID (1.1.1.2) (Process ID 1)
Router Link States (Area 0)
Link ID ADV Router Age Seq# Checksum Link count
1.1.1.1 1.1.1.1 957 0x800000FC 0xAE6C 1
1.1.1.2 1.1.1.2 96 0x80000019 0xF2F0 1
6.6.6.6 6.6.6.6 2430 0x80000008 0xC20B 1
Net Link States (Area 0)
Field Description
1-65535 OSPF Process-ID.
adv-router [<ip-
address>]
(Optional) Displays all the link-state advertisements (LSAs)
of the specified router.
asbr-summary (Optional) Displays information only about the Autonomous
System Boundary Router (ASBR) summary LSAs.
link-state-id Shows the specified type of LSA with matching link-state ID.
database-summary (Optional) Displays how many of each type of LSA for each
area there are in the database, and the total.
external (Optional) Displays information only about the external
LSAs.
network (Optional) Displays information only about the network
LSAs.
nssa-external (Optional) Displays information only about the not so stubby
area (NSSA) external LSAs.
opaque-area (Optional) Displays information about the opaque Type 10
LSAs. Type 10 denotes an area-local scope. Refer to RFC
2370 for more information on the opaque LSA options.
router (Optional) Displays information only about the router LSAs.
self-originate (Optional) Displays only self-originated LSAs (from the local
router).
summary (Optional) Displays information only about the summary
LSAs.
To Next Page
Loading...
Need help?
General
