show ip ospf database
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
583
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Options: (No TOS-capability, No DC)
LS Type: AS External Link
Link State ID: 45.5.5.0 (External Network Number )
Advertising Router: 1.1.1.2
LS Seq Number: 80000003
Checksum: 0xC4BB
Length: 36
Network Mask: /24
Metric Type: 2 (Larger than any link state path)
TOS: 0
Metric: 20
Forward Address: 0.0.0.0
External Route Tag: 0
ALU#
E
XAMPLE 3
To see all the network LSAs in detail, use the following command:
ALU# show ip ospf database network
OSPF Router with ID (1.1.1.2) (Process ID 1)
Net Link States (Area 0)
Routing Bit Set on this LSA
LS age: 2459
Options: (No TOS-capability, No DC, Opq Bit)
LS Type: Network Links
Link State ID: 2.2.2.1 (address of Designated Router)
Advertising Router: 6.6.6.6
LS Seq Number: 80000006
Checksum: 0xB91F
Length: 32
Network Mask: /32
Attached Router: 6.6.6.6
Attached Router: 1.1.1.2
Routing Bit Set on this LSA
LS age: 1150
Options: (No TOS-capability, No DC, Opq Bit)
LS Type: Network Links
Link State ID: 1.1.1.2 (address of Designated Router)
Advertising Router: 1.1.1.2
LS Seq Number: 80000004
Checksum: 0xBD46
Length: 32
Network Mask: /32
Attached Router: 1.1.1.1
Attached Router: 1.1.1.2
Net Link States (Area 1)
To Next Page
Loading...
Need help?
General
