show ip ospf interface
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
591
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
EXAMPLE 2
ALU# show ip ospf interface GigabitEthernet 3/0
GigabitEthernet3/0 is up, line protocol is up
Internet Address 1.1.1.2/24, Area 0
Process ID 1, Router ID 1.1.1.2, Network Type BROADCAST, Cost: 100
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 1.1.1.2, Intf address 1.1.1.2
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:04
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Message digest authentication enabled
ALU#
EXAMPLE 3
ALU# show ip ospf interface statistics
GigabitEthernet3/0
Internet Address 1.1.1.2/24, ProcessID 1, Area 0
Hello Packets Received 516, Hello Packets Sent 508
Database Description Packets Received 11, Database
Description Packets Sent 9
LS Request Packets Received 1, LS Request Packets Sent 2
LS Update Packets Received 22, LS Update Packets Sent 11
LS Acknowledgment Packets Received 7, LS Acknowledgment
Packets Sent 15
Errors 0, Events 0
GigabitEthernet3/1
Internet Address 2.2.2.2/24, ProcessID 1, Area 1
Hello Packets Received 506, Hello Packets Sent 507
Database Description Packets Received 6, Database Description
Packets Sent 7
LS Request Packets Received 0, LS Request Packets Sent 2
LS Update Packets Received 14, LS Update Packets Sent 38
LS Acknowledgment Packets Received 19, LS Acknowledgment
Packets Sent 8
Errors 1, Events 0
ALU#
Parameter Description
GigabitEthernet Status of physical link and operational
status of the protocol.
Internet Address Interface IP address, subnet mask, and
area address.
Process ID OSPF Process ID.
Router ID OSPF Router ID.
Network Type The interface network type.
To Next Page
Loading...
