l2 filter
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
697
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Example
ALU(config)# l2 filter F1
ALU(config-filter-F1)# 10 match m3 permit
deny[reset] Keyword "deny reset" sends TCP RST to
the source, for TCP traffic that matches
the classification, and drops packets for
other non-TCP traffic.
log Logs the first packet of a session.
verbose Logs all packets of a session.
timer-object The name of the time range.
default {deny|permit} If no match cases are given, this default
keyword is used to just configure a
permit or deny on all the incoming traffic.
Parameter Description
To Next Page
Loading...
