DescriptionResetTypeNameBit/Field
GPTM B Time-Out Event DMA Trigger Enable
When this bit is enabled, a Timer B dma_req signal is sent to the µDMA
on a time-out event.
DescriptionValue
Timer B Time-Out DMA trigger is disabled.0
Timer B Time-Out DMA trigger is enabled.1
0RWTBTODMAEN8
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved7:5
GPTM A Mode Match Event DMA Trigger Enable
When this bit is enabled, a Timer A dma_req signal is sent to the µDMA
when a mode match has occurred.
DescriptionValue
Timer A Mode Match DMA trigger is disabled.0
Timer A DMA Mode Match trigger is enabled.1
0RWTAMDMAEN4
GPTM A RTC Match Event DMA Trigger Enable
When this bit is enabled, a Timer A dma_req signal is sent to the µDMA
when a RTC match has occurred.
DescriptionValue
Timer A RTC Match DMA trigger is disabled.0
Timer A RTC Match DMA trigger is enabled.1
0RWRTCDMAEN3
GPTM A Capture Event DMA Trigger Enable
When this bit is enabled, a Timer A dma_req signal is sent to the µDMA
when a capture event has occurred.
DescriptionValue
Timer A Capture Event DMA trigger is disabled.0
Timer A Capture Event DMA trigger is enabled.1
0RWCAEDMAEN2
GPTM A Capture Match Event DMA Trigger Enable
When this bit is enabled, a Timer A dma_req signal is sent to the µDMA
when a capture match event has occurred.
DescriptionValue
Timer A Capture Match DMA trigger is disabled.0
Timer A Capture Match DMA trigger is enabled.1
0RWCAMDMAEN1
June 18, 20141020
Texas Instruments-Production Data
General-Purpose Timers
To Next Page
Loading...
Need help?
General
