DescriptionResetTypeNameBit/Field
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x0ROreserved5:4
Main Oscillator Failure Masked Interrupt Status
DescriptionValue
When read, a 0 indicates that the main oscillator has not failed.
A write of 0 has no effect on the state of this bit.
0
When read, a 1 indicates that an unmasked interrupt was
signaled because the main oscillator failed.
Writing a 1 to this bit clears it and also the MOFRIS bit in the
RIS register.
1
0RW1CMOFMIS3
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved2
BOR Masked Interrupt Status
DescriptionValue
When read, a 0 indicates that a brown-out condition has not
occurred.
A write of 0 has no effect on the state of this bit.
0
When read, a 1 indicates that an unmasked interrupt was
signaled because of a brown-out condition.
Writing a 1 to this bit clears it and also the BORRIS bit in the
RIS register.
1
0RW1CBORMIS1
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved0
June 18, 2014266
Texas Instruments-Production Data
System Control
To Next Page
Loading...
Need help?
General
