DescriptionResetTypeNameBit/Field
Sleep or Deep-Sleep Power Request Active
DescriptionValue
A power request is not active.0
The microcontroller is currently in Deep-Sleep mode or is in
Sleep mode and a request to put the SRAM and/or Flash
memory into a lower power mode is currently active as
configured by the SLPPWRCFG register.
1
0ROPRACT16
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0x00ROreserved15:8
PIOSC Power Down Request Warning
DescriptionValue
No error.0
This bit indicates that the PIOSC was not powered off even
though the PIOSCPD bit was set in the DSLCLKCFG register
because the PIOSC was in use by a peripheral.
1
0ROPPDW7
VLDO Value Above Maximum Error
DescriptionValue
No error.0
An error has occurred because software has requested that the
LDO voltage be above the maximum value allowed using the
VLDO bit in the LDOSPCTL, or LDODPCTL register.
In this situation, the LDO is set to the factory default value.
1
0ROLMAXERR6
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
0ROreserved5
VLDO Value Below Minimum Error in Sleep Mode
DescriptionValue
No error.0
An error has occurred because software has requested that the
LDO voltage be below the minimum value allowed using the
VLDO bit in the LDOSPCTL register.
In this situation, the LDO voltage is not changed when entering
Sleep mode.
1
0ROLSMINERR4
307June 18, 2014
Texas Instruments-Production Data
Tiva
™
TM4C1294NCPDT Microcontroller
To Next Page
Loading...
Need help?
General
